About the SKF Enlight QuickCollect Sensor

Everything you need to know about the SKF Enlight QuickCollect Sensor

Posted on: June 14th, 2018 

In this months article, we will be discussing everything you need to know about the SKF Enlight QuickCollect Sensor. We will be delving deep into the technical details, from how to use the device & app to safety precautions.

1. Typical Operations.
2. Applications that provide the user functionality and measurement capabilities.
3. Launching QuickCollect for the first time.
4. Preparing to take a measurement
5. Taking measurements
6. Additional functionality
7. Safety Precautions

1. Typical Operations


1.1 Who would use the sensor?

  •  Service Personnel
  •  Reliability Personnel
  •  Operations Personnel
  •  Maintenance Personnel

1.2. How does all the data get saved?

Connect real-time or share/save data to the Cloud by installing the system app to either your phone, tablet or smartwatch. With the SKF DataCollect app and subscription to SKF services, you can send the data to SKF experts to analyse. The wireless vibration and temperature sensor allows the user to monitor hundreds of assets per day and thousands of assets per month.

2. Applications that provide the user functionality and measurement capabilities.

Providing basic measurement capability with the SKF QuickCollect App

Providing extended measurement and data collection capability, ability to access Cloud storage and data sharing, and ability to access to SKF Remote Diagnostic Services with the SKF DataCollect app

3. Launching QuickCollect for the first time.

3.1 Tap the SKF QuickCollect icon on your device. The welcome screen will appear.

3.2 Tap Configure thresholds to jump directly to the Settings table and configure your measurement danger and alert alarm thresholds, or tap Skip to navigate to the app’s home screen.

3.3 Tap to select Stop reminding me to skip this welcome screen when you launch the app in the future.

4. Preparing to take a measurement

5. Taking measurements

6. Additional functionality

There are further functional elements which you should familiarise yourself with, these include:

  • Over-the-Air Firmware Updates (OTA)
  • Viewing Graphical Measurement Results
  • Reporting Measurement Results

7. Safety Precautions

7.1 Personnel Safety

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Do not overreach. Maintain proper footing and balance at all times to enable better control of the device during unexpected situations. Use safety equipment. Always wear eye protection. Non-skid safety shoes, hard hat or hearing protection must be used in the appropriate settings. Do not repair or adjust energised equipment alone, under any circumstances. Someone capable of providing first aid must always be present for your safety. To work on or near high-voltage equipment, you should be familiar with approved industrial first-aid methods. Always obtain first aid or medical attention immediately after sustaining an injury. Never neglect an injury, no matter how superficial it seems.

7.2 Device Safety

Devices must only be serviced by qualified SKF repair personnel. Use only accessories recommended or provided by SKF or the manufacturer.

7.3 Energised equipment

Never work on energised equipment unless authorised by a responsible authority. Energised electrical equipment is dangerous. Electric shocks from energised equipment can be fatal. If you must perform authorised emergency work on energised equipment, be sure that you comply entirely with approved safety regulations. 1 – 2 QuickCollect User Manual

7.4 No Submersion/Immersion

This equipment is IP67-rated. It is dust-tight and resistant to accidental immersion in liquid up to a depth of 1 m (39.37 in.) for up to 30 minutes. If the instrument is subjected to more extreme conditions, this may result in adverse operation.

7.5 Avoiding Damage and Injury

To avoid costly damage to the instrument or injury caused by the instrument falling, place the instrument on a solid stable surface when not in use and do not place any heavy objects on it. Use a damp, clean cloth for cleaning. Do not use cleaning fluids, abrasives or aerosols. These might cause damage, fire or electrical shock. Do not open the device cover in a hazardous area or in locations where contact with water or other contaminants may occur.

Buy the SKF Enlight QuickCollect Sensor today

Get your device today from Africa Bearings for only R22 000

 

0